D-Subminiature molded cable
D-sub 9pin Overmolded cable assembly
Molex Micro-Fit Overmolded Plug Adapters
Adapters that unify female cables, eliminating the need to stock both receptacle and plug versions.
Molex Micro-Fit Overmolded Cable Assemblies
Double-ended with strain relief in multiple circuit sizes and lengths for rugged signal connection
Molex Micro-Fit TPA Connectors
Offer 3mm pitch, up to 8.5A maximum current rating, and many design options.
Molex Micro-Fit Single-Row TPA Cable Assemblies
An off-the-shelf solution with a variety of cable lengths, 3.00mm pitch, and a 5.0A current rating.
Molex Micro-Fit Dual-Row TPA Cable Assemblies
3.00mm-pitch connector with a 5A maximum current rating, offers variety of cable lengths.
Molex Connected Home Solutions
Extensive portfolio supporting a wide range of modern home applications.
Molex Micro-Fit+ Connectors
Offers superior design options for flexibility and efficient assembly.
Packaging Details could be customized by client specified.
Normally, the lead time below for reference, the detail according to conversation:
| Quantity (PCS) | 1 - 1000 | 1001 - 5000 | >5000 | Mold/ tooling |
| Est. Time(Days) | 20 | 25 | To be negotiated | 30 days more |
International expressed by DHL, UPS, FedEx, TNT, ARAMEX and EMS etc..
Customers choice for shipping by air, sea or others.
Payment for samples/mass products shall be closing before delivery, amount above 5000 USD according to conversation in somewhere.
Strain Relief,Grommets,Waterproof assembly, Over-molding,Adding glue Multi-process cable
customer special require and design cable assembly etc..
1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design.
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, we have developed over 1000 sets of molds and some of them can be used for customer directly. Besides, we specialize in wire harness over 20 years with more than 5000 products
